2 part mix for dosing calcium alk
17 posts • Page 1 of 2
-
puffedupseagull - Posts: 623
- Joined: Tue Mar 11, 2008 8:38 am
2 part mix for dosing calcium alk
thinking about starting 2 dose the tank again as levels r dropping slowly. been reading that the two part ocean blend is good. cant get it here in aus, wats the equivelent here, ne recommendations
-
gdeeber - Posts: 113
- Joined: Thu May 22, 2008 12:27 pm
I use part A & B by Two little fishy company. I'm not sure if they sell it in your neck of the woods.
-
saltwaterpimp - Posts: 1307
- Joined: Wed Dec 19, 2007 2:22 am
Might work for you, what is dropping ? ???
i use B-ionic and i love it,but i also use sea chem reef buffer/builder along with the two part+ kents turbo calcium.
i use B-ionic and i love it,but i also use sea chem reef buffer/builder along with the two part+ kents turbo calcium.
-
puffedupseagull - Posts: 623
- Joined: Tue Mar 11, 2008 8:38 am
swp, nothing is really dropping great amounts, but calc is a little down. thought i should experiment a little. seachem is in aus and kent and purple up
-
saltwaterpimp - Posts: 1307
- Joined: Wed Dec 19, 2007 2:22 am
check your ALK ? what is it at ? if it is ok disregard my this post ,i dont like purple up,(at ALL) try small amounts of kalkwaser, with the 2part, read all directions . you dont have any sps, so i would think that calcium is percipatating out of the soulution cuz of high alk..let me know
-
puffedupseagull - Posts: 623
- Joined: Tue Mar 11, 2008 8:38 am
calc is down from 450 constant to 430. not a huge worry i know just hought i could try something diffrent getting a little bored cause everything is ok.
Alk is around 9 but usually a little higher around 10 or 11
Alk is around 9 but usually a little higher around 10 or 11